Skip to main content
LAYOUTCALCULATOR SCALE 1/16" CAD
2024 IRC Section R802.4 • SCALE: 1/16" FRACTIONAL
IRC R802.4.1 Tables Framing & Carpentry

Rafter Span Calculator: Rafter Size by Span & Snow Load (IRC)

Rafter span calculator from 2024 IRC Tables R802.4.1(1)–(9): rafter size by horizontal span, spacing, species, grade, roof live or snow load, ceiling attachment and tie height.

Calculation notes
Checked against: 2024 IRC Section R802.4
Published by LayoutCalculator. Confirm with your local building official.
REV DATE:
2024 IRC R802.4.1 Rafter Span Table Lookup
Maximum allowable span
—

Span table for the selected settings

Pre-Calculated Rafter Span Calculator Blueprints (0 Field Specs)

Select any standard jobsite specification below to load its exact 2D SVG diagram and engineering tables:

Contractor & Instructor Widget

Embed This 2D SVG Instrument on Your Website (Ad-Free)

Carpentry instructors, trade schools, and builders can embed the standalone ad-free version of this 2D CAD calculator with one HTML snippet.

How to Read the IRC Rafter Span Tables

IRC Section R802.4.1 gives rafter spans for 20 psf roof live load and 30, 50 and 70 psf ground snow loads, each with two deflection limits: L/180 where no ceiling is attached to the rafters and L/240 where drywall is attached directly (cathedral ceilings).

Rafter span is the horizontal projection from the wall plate to the ridge, not the sloped length. A No. 2 Douglas fir-larch 2x8 at 16" on center spans 18 ft 5 in at 20 psf live, 10 psf dead with no ceiling attached.

The tables assume ceiling joists or rafter ties at the bottom of the attic. When ties are raised, multiply the span by the factor from Table R802.4.1(9): 0.90 at 1/6 of the ridge height, 0.83 at 1/5, 0.76 at 1/4 and 0.67 at 1/3.

Rafter Span Chart: No. 2 Lumber, 20 psf Roof Live / 10 psf Dead, Ceiling Not Attached

Rafter Span Chart: No. 2 Lumber, 20 psf Roof Live / 10 psf Dead, Ceiling Not Attached
SpeciesSize12" OC16" OC24" OC
Douglas fir-larch2x410'-10"9'-10"8'-2"
Douglas fir-larch2x616'-10"14'-7"11'-11"
Douglas fir-larch2x821'-4"18'-5"15'-1"
Douglas fir-larch2x1026'-0"22'-6"18'-5"
Douglas fir-larch2x12>26'-0"26'-0"21'-4"
Hem-fir2x410'-1"9'-2"7'-11"
Hem-fir2x615'-11"14'-2"11'-7"
Hem-fir2x820'-8"17'-11"14'-8"
Hem-fir2x1025'-3"21'-11"17'-10"
Hem-fir2x12>26'-0"25'-5"20'-9"
Southern pine2x410'-4"9'-0"7'-4"
Southern pine2x615'-7"13'-6"11'-0"
Southern pine2x819'-8"17'-1"13'-11"
Southern pine2x1023'-5"20'-3"16'-6"
Southern pine2x12>26'-0"23'-10"19'-6"
Spruce-pine-fir2x410'-4"9'-5"8'-0"
Spruce-pine-fir2x616'-3"14'-4"11'-9"
Spruce-pine-fir2x821'-0"18'-2"14'-10"
Spruce-pine-fir2x1025'-8"22'-3"18'-2"
Spruce-pine-fir2x12>26'-0"25'-9"21'-0"

Source: 2024 IRC Table R802.4.1(1). Values transcribed from the published table; confirm local amendments with your building department.

Field Manuals & Code Tables for Rafter Span Calculator

Index of All 107 Manuals →

Frequently Asked Questions (Rafter Span Calculator)

How far can a 2x6 rafter span?

▼

Under 2024 IRC Table R802.4.1(1) (20 psf roof live, 10 psf dead, no ceiling attached), a No. 2 Douglas fir-larch 2x6 spans 14 ft 7 in at 16" on center. A No. 2 Southern pine 2x6 at 24" spans 11 ft 0 in.

What size rafter do I need for a 16 ft span?

▼

At 20 psf roof live load with rafters 16" on center, No. 2 Douglas fir-larch 2x8 rafters span 18 ft 5 in, so a 2x8 covers a 16 ft horizontal span. With 30 psf ground snow the same 2x8 drops to 15 ft 4 in, so a 2x10 is needed.

Is rafter span measured along the slope?

▼

No. IRC rafter spans are horizontal projections from the wall plate to the ridge. Convert to sloped length only when ordering lumber.

How does snow load change rafter span?

▼

For a No. 2 Douglas fir-larch 2x8 at 16" on center with no ceiling attached, the span is 18 ft 5 in at 20 psf roof live load, 15 ft 4 in at 30 psf ground snow and 12 ft 6 in at 50 psf ground snow.

What if the rafter ties are raised above the wall plates?

▼

Multiply the tabulated span by the Table R802.4.1(9) factor: 0.90 when ties are 1/6 of the ridge height above the plates, 0.83 at 1/5, 0.76 at 1/4 and 0.67 at 1/3.