Skip to main content
LAYOUTCALCULATOR SCALE 1/16" CAD
IRC P2709 1/4" per ft Slope / ANSI A108.1A Mortar Beds
IRC P2709 1/4" per ft Slope / ANSI A108.1A Mortar Beds 8 min read • Updated

Deck Mud Coverage Chart: Bags per Shower Pan & Floor Bed (IRC P2709 1/4" per ft Slope / ANSI A108.1A Mortar Beds)

How many bags of deck mud (dry-pack mortar) a shower pan or tile floor bed needs: coverage per bag at 3/4" to 2" thickness, average-thickness math for sloped pans, and mix ratios.

Published by LayoutCalculator • Formulas reference published code tables; confirm with your local building official.
Companion 2D SVG CAD Instrument

Need an Instant Scale Blueprint? Launch Tile Layout Planner

Generate real-time 1/16" fractional dimensions, framing square marks, and printable workshop sheets.

Open the Tile Layout Planner →
Direct Code Summary • IRC P2709 1/4" per ft Slope / ANSI A108.1A Mortar Beds SPEC BULLETIN

What Is the Standard Rule for Deck Mud Coverage Chart?

IRC P2709 1/4" per ft Slope / ANSI A108.1A Mortar Beds: Deck mud volume is simply area × average thickness: Cubic Feet = Sq.Ft × Thickness (in) ÷ 12. Divide by the yield printed on your bag (about 0.5 cu.ft for many 60-lb premixes) to get the bag count. At a 1-1/4" average bed, one 0.5 cu.ft bag covers about 4.8 sq.ft, so a typical 3 ft × 5 ft (15 sq.ft) shower pan needs about 4 bags before waste.

LIVE FIELD SOLVER

Interactive Jobsite Verification Instrument

IRC P2709 1/4" per ft Slope / ANSI A108.1A Mortar Beds
Deck Mud Bags Needed
4 Bags (+1 Reserve = 5)
1.56 cu.ft packed mortar @ 0.50 cu.ft/bag

Key Engineering & Code Takeaways

  • Deck mud volume is simply area × average thickness: Cubic Feet = Sq.Ft × Thickness (in) ÷ 12. Divide by the yield printed on your bag (about 0.5 cu.ft for many 60-lb premixes) to get the bag count.
  • At a 1-1/4" average bed, one 0.5 cu.ft bag covers about 4.8 sq.ft, so a typical 3 ft × 5 ft (15 sq.ft) shower pan needs about 4 bags before waste.
  • For a sloped pan, use the AVERAGE thickness, not the thickness at the wall. With a center drain and four planes sloping to it, average thickness ≈ thickness at the drain + 1/3 of the rise at the walls; with a linear drain on one wall it is the drain thickness + 1/2 of the rise.
  • Site-mixed deck mud is typically 1 part portland cement to 4–6 parts sand by volume, mixed only damp enough to hold a ball when squeezed. Always buy one extra bag; packed dry-pack consolidates and trowel waste adds up.

Part of our Tile & Flooring series; start with How to Center a Bathroom Tile Grid & Avoid <2" Sliver Cuts. Related: Herringbone & Chevron Tile 45-Degree Centerline Math, Curbless Shower Pan 1/4" Per Foot Slope & Drain Math, Tile Expansion Joint Spacing Guide (TCNA EJ171 Rules).

Deck Mud Coverage Chart (Bags at 0.5 cu.ft Yield per Bag)

← Swipe table horizontally → IRC P2709 1/4" per ft Slope / ANSI A108.1A Mortar Beds
Deck Mud Coverage Chart (Bags at 0.5 cu.ft Yield per Bag) (IRC P2709 1/4" per ft Slope / ANSI A108.1A Mortar Beds)
Average Bed ThicknessSq.Ft per Bag15 Sq.Ft (3×5 Shower)20 Sq.Ft (4×5 Shower)32 Sq.Ft (4×8 Shower)
3/4 inch 8.0 sq.ft 2 Bags (0.94 cu.ft) 3 Bags (1.25 cu.ft) 4 Bags (2.00 cu.ft)
1 inch 6.0 sq.ft 3 Bags (1.25 cu.ft) 4 Bags (1.67 cu.ft) 6 Bags (2.67 cu.ft)
1-1/4 inch 4.8 sq.ft 4 Bags (1.56 cu.ft) 5 Bags (2.08 cu.ft) 7 Bags (3.33 cu.ft)
1-1/2 inch 4.0 sq.ft 4 Bags (1.88 cu.ft) 5 Bags (2.50 cu.ft) 8 Bags (4.00 cu.ft)
2 inch 3.0 sq.ft 5 Bags (2.50 cu.ft) 7 Bags (3.33 cu.ft) 11 Bags (5.33 cu.ft)

1. The Deck Mud Bag Formula

Deck mud (also called dry-pack or floor mortar) is ordered by volume. Multiply the pan area in square feet by the average bed thickness in inches and divide by 12 to get cubic feet: 15 sq.ft × 1.25" ÷ 12 = 1.56 cu.ft. Then divide by the yield printed on the bag. Many 60-lb sand/topping or premixed floor-mud bags yield roughly 0.5 cu.ft, so 1.56 ÷ 0.5 = 3.1 → 4 bags. Yields differ by product and by how hard you pack the mortar, so enter the yield from your own bag in the calculator above.

2. Finding the Average Thickness of a Sloped Shower Pan

Plumbing codes require shower floors to slope toward the drain at a minimum of 1/4 inch per foot (IRC P2709). The bed is thin at the drain and thicker at the walls, so the volume depends on the average. For a center drain with four planes sloping to it, the mortar above the drain level forms a pyramid, whose average height is one third of its peak: average thickness ≈ drain thickness + rise ÷ 3. Example: a 3 ft × 5 ft pan with a center drain, 3/4" of mortar at the drain and a 30" run to the far wall rises 2.5 ft × 1/4" = 5/8", so the average is about 3/4" + 5/8" ÷ 3 ≈ 1" (round up to 1-1/4" to cover screeding waste). A linear drain along one wall creates a wedge, so its average is drain thickness + rise ÷ 2.

3. Mix Ratio, Consistency and Pre-Slope vs Top Bed

Site-mixed deck mud is usually 1 part portland cement to 4–6 parts sharp sand by volume, mixed with just enough water to hold a firm ball when squeezed (no water should drip out). In a traditional liner shower, the mortar is placed twice: a sloped pre-slope under the PVC/CPE liner, and a top bed over it. Count both layers when ordering. Bonded-waterproofing systems (sheet or liquid membranes over the mortar) need only one sloped bed. Thickness limits at the drain come from the drain and membrane manufacturer’s details, so check them before you mix.

Primary Standards & Building Code Authorities (IRC P2709 1/4" per ft Slope / ANSI A108.1A Mortar Beds)

All dimensions, tolerances, and safety thresholds in this field guide are cross-referenced against current US residential building, electrical, and trade standards:

  • ICC International Residential Code (IRC R311.7) Stairway rise/run geometry, headroom, and handrail code requirements. ICC Digital Codes →
  • NFPA 70 / National Electrical Code (NEC 690) Photovoltaic Voc temperature coefficients, ampacity, and OCPD sizing. NFPA Standards →
  • TCNA Handbook & ANSI A108.02 Ceramic and porcelain tile centering, lippage, and EJ171 expansion joints. TCNA Council →
  • APA Engineered Wood & AWC NDS Structural wood panel sizing, kerf allowances, and framing lumber spans. APA Wood →

Pre-Calculated Blueprints for Tile Layout Planner (12 Specs)

Related Calculators & Tile & Flooring Hub

Tile Layout Planner
TCNA Handbook EJ171 / ANSI A108.02

Frequently Asked Questions: IRC P2709 1/4" per ft Slope / ANSI A108.1A Mortar Beds

How many bags of deck mud do I need for a 3x5 shower pan?

▼

A 3 ft × 5 ft pan is 15 sq.ft. At a 1-1/4" average thickness that is 15 × 1.25 ÷ 12 = 1.56 cu.ft, or about 4 bags at 0.5 cu.ft per bag. Add one extra bag, and double the estimate if you also mortar a pre-slope under a PVC liner.

How much area does a 60-lb bag of deck mud cover?

▼

At about 0.5 cu.ft per bag, a 60-lb bag covers roughly 8 sq.ft at 3/4", 6 sq.ft at 1", 4.8 sq.ft at 1-1/4", 4 sq.ft at 1-1/2" and 3 sq.ft at 2". Check the yield printed on your bag; it varies by brand.

What is the mix ratio for deck mud?

▼

Deck mud is typically 1 part portland cement to 4–6 parts sand by volume, mixed damp rather than wet so it can be packed and screeded to slope.