Skip to main content
LAYOUTCALCULATOR SCALE 1/16" CAD
2024 IRC Section R602.3 • SCALE: 1/16" FRACTIONAL
IRC R602 15-1/4" Setback Framing & Carpentry

8-Ft Closet Wall + Door — 8-Ft Closet Wall Framing: 2x4 Studs @ 16" OC + Door

Compact 8-foot bedroom closet 2x4 framing plan (8-ft ceiling, 92-5/8" pre-cut studs) at 16" OC with a 36" door rough opening: 15 studs and 2 plates.

Calculation notes
Checked against: 2024 IRC Section R602.3
Published by LayoutCalculator. Confirm with your local building official.
REV DATE:
Result summary

An 8-ft closet partition (97-1/8" frame) uses 92-5/8" pre-cut 2x4 studs: 7 layout studs + 2 corner backers + 4 door king/jack framing studs = 15 total studs (+10% cull) and 2 × 16-ft plate boards.

Typical Field Application

Reach-in bedroom closets, laundry alcoves, pantry enclosures, and half-bath remodel partitions.

Field note

Install horizontal 2x6 solid wood blocking between studs at 66" and 78" AFF inside closet walls before drywall so heavy closet rod brackets never pull out.

IRC R602.3 2D SVG Stud Wall Framing & Rough Opening Console
Cut Stud 92-5/8"
Stud Qty 15 pcs
IRC R602 PASS (16" OC)
8 ft (96")
8' (Closet) 16' (Bedroom) 28' (Garage) 60' (Ext)
97-1/8" (8'-1-1/8")
96" (8'-0") 97.125" (8ft Std) 109.125" (9ft) 121.125" (10ft)
✓ PASSES 2024 IRC R602.3 & R602.7 2x4 @ 16" OC

Exact cut stud length is 92-5/8" (Std 92-5/8" Pre-Cut) after deducting 4-1/2" for 3 plates. Offset upper top plate lap joints >= 24" per IRC R602.3.2.

2D IRC R602 Stud Wall Framing Elevation, Rough Openings & Plate Layout Blueprint Interactive scale CAD framing elevation showing PT sole plate, double top plates, common studs on center, king and jack trimmers, headers, cripples, and 3/4-inch hooked-tape setback marks. CUT STUD: 92-5/8" | 2X4 @ 16" OC | ORDER: 15 STUDS (+10%) GOLD: Common (7) • SKY: King (2) • GREEN: Jack/PT (2) • ORANGE: 2x8 Header 38"×82.5" DOOR RO Wall Length: 8'-0" (96") • 7 Grid + 2 Corner + 4 RO Studs 97-1/8" Cut:92-5/8"
Cut Stud Length
92-5/8"
Std 92-5/8" Pre-Cut
Studs (+10% Waste)
15 Studs
13 Net Framing
16-Ft Plate Boards
2 Boards
24 LF (1 PT Sole)
4x8 OSB Sheathing
3 Sheets
65 Sq Ft Gross
16d Framing Nails
225 Nails
+156 8d Ring-Shank

3/4" Setback Hooked-Tape Plate Marks 16" On-Center

Hook tape at left plate end (0"), scribe each leading stud edge at OC - 3/4", and mark X to the right so 4x8 drywall/OSB seams land dead-center:

Stud Wall Bottom and Top Plate Hooked Tape-Measure Setback Marks
Stud # Leading Edge + X Stud Centerline Framing Role
#1 0" [X] 3/4" Face Start End + Corner Backing
#2 15-1/4" [X] 16" OC 16" OC Grid Stud
#3 31-1/4" [X] 32" OC 16" OC Grid Stud
#4 47-1/4" [X] 48" OC 4-Ft Sheet Seam Stud
#5 63-1/4" [X] 64" OC 16" OC Grid Stud
#6 79-1/4" [X] 80" OC 16" OC Grid Stud
#7 94-1/2" [X] 96" End Closing End Stud

Required Bill of Materials (BOM) & Fasteners

2024 IRC Table R602.3(1)
  • 15 × 2x4 Kiln-Dried Studs (92-5/8" Cut • Std 92-5/8" Pre-Cut) 7 grid + 2 corner backing + 2 king + 2 jack + 10% cull
  • 1 × 16-ft PT Sole Plate + 1 × 16-ft KD Top Plates (2x4) 1 × Double 2x8 Header (41" Cut) • IRC R317.1 PT sill on concrete + 1/2" anchor bolts @ 6' OC
  • 3 × 4x8 Sheets 7/16" Structural-1 OSB + 225 × 16d Framing Nails Plus 156 × 8d (2-3/8" × 0.113") ring-shank sheathing nails @ 6" panel edges / 12" field

Independent Field Spec Notice: Stud spacing, header bearing jacks, and fastener schedules reference 2024 IRC Section R602.3 and R602.7 with zero manufacturer sponsorship.

Need an ad-free Framing Cut Sheet + Vector .SVG wall elevation?

Pre-Calculated Stud Wall Framing Calculator Blueprints (12 Field Specs)

Select any standard jobsite specification below to load its exact 2D SVG diagram and engineering tables:

Open Base Stud Wall Framing Calculator →
Contractor & Instructor Widget

Embed This 2D SVG Instrument on Your Website (Ad-Free)

Carpentry instructors, trade schools, and builders can embed the standalone ad-free version of this 2D CAD calculator with one HTML snippet.

SPECIFICATION WALKTHROUGH // 8-Ft Closet Wall + Door

Mathematical Derivation & Field Specifications: 8-Ft Closet Wall + Door

Updated • Published by LayoutCalculator

Framing a 8-foot (96") 2x4 wall at a 97-1/8" (97.125") total framed height with sole + double top plate (4.5" deduction) establishes an exact vertical stud cut length of 92-5/8" (92.625").

At 16" on-center spacing, the wall requires 7 grid layout studs plus California 3-stud corner backing and rough-opening king/jack framing (13 net studs; order 15 studs with 10% cull), 2 × 16-ft plates, and 3 sheets of 4×8 OSB sheathing.

On-Center Stud Spacing Comparison for 8-Ft 2x4 Wall

OC Spacing Grid Studs Order (+10% Cull) 1st Tape Setback 2024 IRC R602.3 Rating
12" OC 9 17 Studs 11-1/4" X IRC 2x4 & 2x6 Multi-Story
16" OC (Selected) 7 15 Studs 15-1/4" X IRC 2x4 & 2x6 Multi-Story
19.2" OC 6 14 Studs 18-7/16" X Verify Roof-Only / Engineered
24" OC 5 13 Studs 23-1/4" X Verify Roof-Only / Engineered

3/4" Setback Hooked-Tape Plate Layout Marks (16" OC Sheet-Centering)

Stud # Leading Edge (Scribe + X) Stud Centerline 4×8 Panel Alignment
Stud #2 15-1/4" [X] 16" Field Stud
Stud #3 31-1/4" [X] 32" Field Stud
Stud #4 47-1/4" [X] 48" 48" Sheet Seam
Stud #5 63-1/4" [X] 64" Field Stud
Stud #6 79-1/4" [X] 80" Field Stud
Stud #7 95-1/4" [X] 96" 48" Sheet Seam

Official Building Code & Industry Standard Citations

  • ICC International Residential Code (IRC R602.3) Wood stud wall framing: stud size, height and spacing limits, top-plate splices, and header requirements. Reference: ICC Digital Codes (codes.iccsafe.org).
  • APA Engineered Wood & AWC NDS Span Standards Governs structural panel thickness, kerf tolerance, and Southern Pine / Douglas Fir stringer throat bending capacity. Reference: APA Engineered Wood Association (apawood.org).

Field Manuals & Code Tables for Stud Wall Framing Calculator

Index of All 107 Manuals →

Frequently Asked Questions (8-Ft Closet Wall + Door)

What is the exact stud cut length and total stud count for a 8-ft × 97-1/8" 2x4 wall at 16" OC?

▼

Deducting 4.5" (sole + double top plate) from the 97-1/8" framed wall height yields an exact stud cut length of 92-5/8". Across 8 ft at 16" OC (13 net studs w/ corners & openings), order 15 2x4 studs (+10% cull) and 2 × 16-ft plates.

Where do I place my first tape-measure mark so 4x8 sheathing lands on stud centers at 16" OC?

▼

Hook your tape at 0" on the flush outside edge of the end stud and mark the leading edge 3/4" back of 16" at 15-1/4" with an X to the right, then 31-1/4" and 47-1/4" so every 48-inch OSB and drywall edge lands dead-center on a 1-1/2" stud.

How many 4x8 OSB sheathing panels are needed for this 8-ft wall?

▼

Covering a 8-ft × 8.1-ft wall surface (65 sq.ft gross) requires 3 sheets of 4x8 structural rated sheathing (7/16" or 15/32" Exposure 1 OSB) with an 8% trim buffer.